Skip to content
5mm Red & Blue Flashing LED. Clear Lens. Lighting System Prewired 2pcs

5mm Red & Blue Flashing LED. Clear Lens. Lighting System Prewired 2pcs

$8.43 - $8.43
$8.43
$8.43 - $8.43
$8.43

Dioramo Scale Modeling

#17660

2 Pieces of Red & Blue 5mm DIP LED Lights with a built-in Blinking / Flashing Effect, Prewired and Compatible with the Dioramo Lighting System.

A Prewired Flip-Flop Flashing LED Light Alternating between Red and Blue Colors, commonly used to mimic Law Enforcement in Hobbies.

  • Red & Blue Light Color Flashing DIP LED Component.
  • 5mm Round, Transparent Clear Lens.
  • Soldered and Wired with an in-line 510R current-limiting Resistor (#49085) using 3-feet of our Premium Ultra-Flexible Black 28 AWG Soft Silicone 2P Ribbon Flat Cable (#32021).
  • Ending with a JST-XH2 Connector Plug.
  • Reputable LED that is Robust, Cost-effective, and Ready to Use.

 

Mixing Different Red & Blue Light Color LED Lights also result in out-of-sync Blinking rates, which allows for Customizing unique Scaled Flashing FX in Hobby Models, Dioramas, RC Cars, Diecast, Fire Trucks, Toys, etc.

 

Notes:

  1. This Plug & Play LED Light is Compatible with the Dioramo Lighting System, and has a Fail-Safe design. You can't cause harm by accidentally connecting it the wrong way. If the plug fits into a connector, then it may be connected there.
  2. Flashing / Blinking LEDs can not be dimmed. Starving the internal chip of sufficient power may have adverse effects.
  3. These LEDs Flash / Blink at a rate of 2 Hertz, which is 120 cycles per minute.

Embracing Modularity

  • The Dioramo Lighting System is Never Obsolete.
  • Only get the parts you want, to build exactly what you need.
  • Grow your Lighting System as your project expands.

 

Specifications:

Lighting Category: Prewired for Lighting System
Lighting Type: LED - DIP (dual In-line package / through hole)
LED Size: 5 mm (millimeters)
Light Color: Red & Blue
Wavelength: Red: 620-625 nm
Blue: 450-465 nm (nanometers)
Brightness: Red: 2000-3000 mcd
Blue: 7000-8000 mcd (millicandela)
Lens Color:
 None / Clear
Lens Transparency: Transparent
Lens Shape: Round (side view)
Lens Surface: Round (top view)
Viewing Angle: 30° (degrees)
Light Effect: Blinking / Flashing
2 Hz (hertz)
Other Names: Light Emitting Diode, F5 (aka)
Supply Voltage: 12 V (volts)
Current Limiting: 510 R (ohms) Resistor Prewired In-line
Power: 0.06 W (watt)
Connection: JST-XH2 Connector Plug

* Specifications are based on the LED component's optimal performance.

 

Product Variations using this Red & Blue 5mm Round, Flashing LED Component:

#17600 - Components Only
#07620 - Easy Prewired (No Resistor Added)
#17620 - Easy Prewired for 3 Volts
#17640 - Easy Prewired for 5-6 Volts
#17680 - Easy Prewired for 9-12 Volts
#17660 - Prewired for Dioramo's Plug & Play Lighting System

 

All Types - Prewired 5mm DIP LED Lights

 

 

Important:

The Dioramo Lighting System is designed to be both an Easy-Peasy Plug-and-Play Solution and a Customizable System for DIY Builders. Our DIY Adapters and Cables allow for both approaches.

DIY Connections, however, are done at your own risk. Faulty DIY connections resulting in a short circuit may damage the electronics.