New Product: Police Light Flasher Kit for Scale Models – Compact DIY PCB Version

New Police Light Flasher Kit for Scale Models available from Dioramo Scale Modeling. This Compact DIY PCB Version Generates a Modern Alternating "Tripple-Flash" Sequence (see video).

Connect your own LEDs up to 200mA, No Resistors needed!
6-15 Volts DC Power Input, Perfect for Mobile Platforms like RC and Die-cast.

Kit Includes:

Compact Controller PCB
Prewired Harness with Super Bright Red & Blue LEDs for Testing or Using
Heat Shrink Protection Sleeve for PCB (50x18mm)
Attachment Screw (#55331)

Specifications:

Maximum Device Current:	200mA
Operating Voltage:	6 to 15 Volts DC
Connections:	On PCB: 2.54mm (0.01”) Pitch Male 6-pin Header. Recommended: Prewired 2.54mm Female Dupont Connectors. Alternative: Solder wires directly to pins.
Features:	Built-in Resistors. None needed for your LEDs.
Overall Dimensions:	38 mm (1.5") x 18.2 mm (0.72")

Reminder:

Red + Blue channel LEDs have a combined maximum load of 200mA

Note:

Do not use to impersonate law enforcement!

This DIY PCB product has an exposed circuit board. It requires to be handled with care and installed accordingly. DIY Connections are done at your own risk. Please confirm the correct connection procedure. This is a model making product. This is not a toy! Not suitable for children under 14 years.