Police Light Flasher Kit for Scale Models – Compact DIY PCB Version
Dioramo Scale Modeling # 21500. Police Light Flasher Kit for Scale Models – Compact DIY PCB Version. Perfect for Smaller Spaces. Generates a Modern Alternating "Tripple-Flash" Police Light Effect Sequence (see video).
Connect any LEDs, No Resistors are needed. Load up to 200mA. 6-15 Volts DC Operating Voltage making 6V Batteries an option for Moving Platforms. For Scale Models, Die-cast, RC, Do-It-Yourself Projects and more.
Kit Includes:
- Compact Controller PCB
- Prewired Harness with Super Bright Red & Blue LEDs for Testing or Using
- Heat Shrink Protection Sleeve for PCB (50x18mm)
- Attachment Screw (#55331)
Specifications:
| Maximum Device Current: | 200mA |
| Operating Voltage: | 6 to 15 Volts DC |
| Connections: | On PCB: 2.54mm (0.01”) Pitch Male 6-pin Header. Recommended: Prewired 2.54mm Female Dupont Connectors. Alternative: Solder wires directly to pins. |
| Features: | Built-in Resistors. None needed for your LEDs. |
| Overall Dimensions: | 38 mm (1.5") x 18.2 mm (0.72") |
Reminder:
Red + Blue channel LEDs have a combined maximum load of 200mA
Note:
Do not use to impersonate law enforcement!
This DIY PCB product has an exposed circuit board. It requires to be handled with care and installed accordingly. DIY Connections are done at your own risk. Please confirm the correct connection procedure. This is a model making product. This is not a toy! Not suitable for children under 14 years.